Hotpoint RB757WHWW User Guide - Page 44

Safety Instructions Operating Instructions Care and Cleaning ge.com Problem Coil Cooktops Surface units not functioning properly Oven-All Models Oven light does not work Oven will not work Food does not bake or roast properly Possible Causes What To Do The surface units are not plugged in solidly. •With the controls off, check to make sure the surface unit is plugged completely into the receptacle. The surface unit controls improperly set. •Check to see the correct control is set for the surface unit you are using. The drip pans are not set securely •With the controls off, check to make sure the drip pan is in the cooktop. in the recess in the cooktop and that the opening in the pan lines up with the receptacle. Light bulb is loose or defective. •Tighten or replace the bulb. Switch operating light is broken. •Call for service. Plug on range is not completely inserted in the electrical outlet. A fuse in your home may be blown or the circuit breaker tripped. Oven controls improperly set. • Make sure electrical plug is plugged into a live, properly grounded outlet. • Replace fuse or reset circuit breaker. • See the Using the oven section. On self-cleaning models, door left in the locked position. • If necessary, allow the oven to cool then unlock the door. Oven controls improperly set. Shelf position is incorrect or the shelf is not level. Incorrect cookware or cookware of improper size being used. Oven thermostat needs adjustment. •See the Using the oven section. • See the Using the oven section. • See the Using the oven section. •See the Adjust the oven thermostat-Easy to do yourself! section. Installation Instructions Troubleshooting Tips Consumer Support 43