Hunter 25522 Owner's Manual
Hunter 25522 Manual
 |
View all Hunter 25522 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hunter 25522 manual content summary:
- Hunter 25522 | Owner's Manual - Page 1
1 © 2005 Hunter Fan Company 41877-01 06/14/2007 - Hunter 25522 | Owner's Manual - Page 2
entire booklet carefully before beginning installation. Save these instructions. • Use only Hunter replacement parts. • To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these instructions, and use only the hardware supplied. • To - Hunter 25522 | Owner's Manual - Page 3
site is suitable, go to the installing the ceiling plate section and begin installing your new Hunter fan. preparing a new fan site To prepare the fan site follow four steps: • Cutting the Ceiling Hole • Installing the Support Brace (if necessary) • Installing the Outlet Box • Preparing the Wiring - Hunter 25522 | Owner's Manual - Page 4
5. Align the slotted holes (refer to Figure 8) in the ceiling plate with the pilot holes in the wood support structure. For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows on the ceiling plate are pointing towards the ceiling peak. Refer to Figure 8. © 2007 Hunter Fan Company - Hunter 25522 | Owner's Manual - Page 5
the ceiling plate to assist in determining the direction to assemble. WARNING: Fan may fall if not assembled as directed in these installation instructions. Hook Loop Figure 11 - Hanging the fan wiring the fan 1. and twist clockwise until tight as. 41877-01 06/14/2007 © 2007 Hunter Fan Company - Hunter 25522 | Owner's Manual - Page 6
the fan. The arrows on the hanger ball and on the ceiling plate should be pointing in the same direction and should be pointing towards the tab hole on the canopy. Refer to Figure 13. Tab Hole and Tab Canopy Screw Figure 14 - Installing the canopy assembling the blades 1. Remove the blade mounting - Hunter 25522 | Owner's Manual - Page 7
and plug button as shown in Figure 20. Cap Plug Button Figure 20 - Installing the cap and plug button 41877-01 06/14/2007 © 2007 Hunter Fan Company - Hunter 25522 | Owner's Manual - Page 8
holders may be cleaned in the same manner as the fan finish. The sailcloth blade material should be wiped off with a damp cloth. troubleshooting Problem: Nothing happens; fan does not move. 1. Turn power on, replace fuse, or reset breaker. 2. Loosen canopy, check all connections according to the
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
41877-01
0
6
/1
4
/200
7