Husqvarna 120 Mark II Owner Manual - Page 11

Contents Introduction 11 Safety 12 Assembly 16 Transportation 21 Storage 21 Technical data 21 Operation 16 Accessories 23 Maintenance 19 Introduction Operator's manual The initial language of this operator's manual is English. Operator's manuals in other languages are translations from English. Product overview (Fig. 1) 1. Product and serial number plate 2. Trigger lockout 3. Front handle 4. Cylinder cover 5. Chain brake and front hand guard 6. Muffler 7. Bar nose sprocket 8. Right hand guard 9. Trigger 10. Sprocket cover 11. Chain catcher 12. Guide bar 13. Saw chain 14. Starter handle 15. Chain oil tank 16. Starter 17. Fuel tank 18. Choke control 19. Rear handle 20. Stop switch 21. Idle adjustment screw 22. Primer bulb 23. Information and warning decal 24. Chain tensioning screw 25. Guide-bar cover 26. Combination tool 27. Operator's manual Chemical warning WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the state of California to cause cancer and birth defects or other reproductive harm WARNING: Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling Symbols on the product (Fig. 2) Warning (Fig. 3) Read this manual (Fig. 4) Use approved head protection, hearing protection and eye protection (Fig. 5) Use approved protective gloves (Fig. 6) The product agrees with the applicable EC Directives (Fig. 7) Sound power level (Fig. 8) Chain brake, not engaged (left). Chain brake, engaged (right) (Fig. 9) Choke control (Fig. 10) Primer bulb (Fig. 11) Refueling (Fig. 12) Chain oil fill (Fig. 13) This product agrees with the applicable EAC directives 654 - 007 - 05.05.2020 11