Husqvarna 3120 XP Workshop Manual - Page 42
Chain brake, SAFETY EQUIPMENT, Dismantling
View all Husqvarna 3120 XP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
SAFETY EQUIPMENT Chain brake A Dismantling Dismantle the clutch cover and clean. See the operating instructions. Slide the hand guard forwards so that the brake is actuated. Loosen the screw on the hand guard and screw back 2 turns. Gently hit the screw so that the threaded part of the bushing can be removed. Dismantle the other part of the bushing by means of a punch. Remove the cylindrical pin A. All saws except 3120 3120 Remove the cover on the chain brake spring. The cover has 4 or 5 screws. WARNING! If the clutch cover slides out of ! the vice's grip the spring can fly out with immense force resulting in personal injury! Wear protective glasses! Place the clutch cover in a vice with the jaws positioned as shown below and release the tubular pin B. Carefully knock out the tubular pin B. B WARNING! If the brake is not 'on', the spring ! can fly out resulting in personal injury. Wear protective glasses! Continues on next page. 42 - English 3120 continues on next page.