Husqvarna 3120 XP Workshop Manual - Page 55
Assembly, The liquid and its vapours
View all Husqvarna 3120 XP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Assembly Saws 36, 40, 41, 45, 42, 242XP, 246, 51, 55, 254XP, 257 and 262XP. SAFETY EQUIPMENT Other saws. WARNING! The fuel used in the chain saw ! poses the following hazards: 1. The liquid and its vapours are poisonous. 2. Can cause skin irritation. 3. Is highly inflammable. Fit springs in appropriate cases. Saws 36, 41, 42, 242XP, 246, 51, 55, 254XP, 257, 262XP and 394. Saws 61, 268, 268K, 272XP, 272K, 272S, 281XP and 288XP. See next page. Saws 40, 45. Saw 3120. On saw 394, fit the cable to the trigger. Insert them into the handle from the front. Fit the cable to the trigger and install the throttle lock and trigger. Fit the trigger with the cable from the front. Fit the pin (B) and spring (when used). B Fit the side of the handle using three screws on the side and one underneath, which holds the spring. Fit the spring and slide the throttle lock forwards from above so that its rear edge can be slid in under the edge of the handle. All saws except 40 and 45 continue on the next page. English - 55