Husqvarna 3120 XP Workshop Manual - Page 88
Walbro WG, Walbro WJ
View all Husqvarna 3120 XP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
CARBURETTOR Walbro WJ 1. Remove the cover (A) over the metering unit and carefully remove the control diaphragm (B) with the gasket. 2. Undo the screw (H) and take out the D needle valve (C) with lever arm, shaft and spring. 3. Remove the cover (E) over the pump unit and carefully remove the gasket (F) and the pump diaphragm (G). J 4. Using a needle or the like carefully remove the fuel screen (D). C 5. Unscrew the high and low speed jet screws. 6. Remove the plug (J). See page 85. B 7. If necessary remove the throttle and choke A valves as well as the shafts, lever arms and springs. 8. Remove the "semi fixed jet" (K). See page 85. E F G K H Walbro WG A 1. Remove the cover (A) over the metering B unit and carefully remove the control diaphragm (B) with the gasket. 2. Undo the screw (H) and take out the H needle valve (C) with lever arm, shaft and C spring. K 3. Remove the cover (E) over the pump unit and carefully remove the gasket (F) and J the pump diaphragm (G). 4. Using a needle or the like carefully remove the fuel screen (D). 5. Unscrew the low speed jet screws. 6. Remove the plugs (J). See page 85. D 7. If necessary remove the throttle and choke valves as well as the shafts, lever arms G and springs. F 8. Remove the "semi fixed jet" (K). See page 85. E 88 - English