Husqvarna 3120 XP Workshop Manual - Page 53
Husqvarna 3120 XP Manual
View all Husqvarna 3120 XP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
SAFETY EQUIPMENT Saws 61, 268, 268K, 272XP, 272K, 272S, 281XP, 288XP and 394. Saws 36, 41, 42, 55, 242XP, 246, 51, 254XP, 257 and 262XP. Dismantle the throttle pin (B) by using a punch. B Remove the rubber element (A). Slide out the throttle pin (B) and lift out the throttle arm and spring. BA A Dismantle the throttle. On saw 394, also remove the throttle cable. Saws 40 and 45 Remove the three screws in the side of the handle as well as the screw holding the spring under the handle. Saw 3120 Remove the three pins with a punch. Press the throttle lock down and move it and the trigger forwards until the back edge of the lock appears. Lift out the throttle lock and the throttle. Lift out the trigger lock. Lift out the throttle with cable from the front. Remove the springs where appropriate. English - 53