Husqvarna 520iLX Owner Manual - Page 12

To start the product, To operate the product

Page 12 highlights

3. Make sure that the green charging light on the battery charger comes on. That means that the battery is connected correctly to the battery charger. Battery information Refer to the operator's manual of the battery for information about how to use the battery. To start the product 1. Press and hold the start/stop button until the green LED is lit. 4. When all LEDs on the battery come on, the battery is fully charged. 5. To disconnect the battery charger from the mains socket, pull the plug. Do not pull the cable. 6. Remove the battery from the battery charger. Note: Refer to the battery and battery charger manuals for more information. To connect the battery to the product WARNING: Only use Husqvarna original batteries with the product. 1. Make sure that the battery is fully charged. 2. Push the battery into the battery holder of the product. The battery locks into position when you hear a click. 2. Use the power trigger to control the speed. To operate the product To trim the grass 1. Hold the trimmer head immediately above the ground at an angle. Do not push the trimmer line into the grass. 2. Decrease the length of the trimmer line by 10-12 cm / 4-4.75 in. 3. Decrease the engine speed to decrease the risk of damage to plants. 4. Use 80 % throttle when you cut grass near objects. CAUTION: If the battery does not move easily into the battery holder, the battery is not installed correctly. This can cause damage to the product. 3. Make sure that the battery is installed correctly. To clear grass 1. Keep the trimmer head above the ground. 2. Tilt the trimmer head. 3. Cut with the end of the trimmer line around objects in the work area. CAUTION: Cut grass. Other objects that are hit by the trimmer line, increases the wear on the trimmer line. 12 756 - 001 - 24.10.2018

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

3.
Make sure that the green charging light on the
battery charger comes on. That means that the
battery is connected correctly to the battery charger.
4.
When all LEDs on the battery come on, the battery is
fully charged.
5.
To disconnect the battery charger from the mains
socket, pull the plug. Do not pull the cable.
6.
Remove the battery from the battery charger.
Note:
Refer to the battery and battery charger manuals
for more information.
To connect the battery to the product
WARNING:
Only use Husqvarna original
batteries with the product.
1.
Make sure that the battery is fully charged.
2.
Push the battery into the battery holder of the
product. The battery locks into position when you
hear a click.
CAUTION:
If the battery does not move
easily into the battery holder, the battery
is not installed correctly. This can cause
damage to the product.
3.
Make sure that the battery is installed correctly.
Battery information
Refer to the operator's manual of the battery for
information about how to use the battery.
To start the product
1.
Press and hold the start/stop button until the green
LED is lit.
2.
Use the power trigger to control the speed.
To operate the product
To trim the grass
1.
Hold the trimmer head immediately above the
ground at an angle. Do not push the trimmer line into
the grass.
2.
Decrease the length of the trimmer line by 10-12
cm / 4-4.75 in.
3.
Decrease the engine speed to decrease the risk of
damage to plants.
4.
Use 80 % throttle when you cut grass near objects.
To clear grass
1.
Keep the trimmer head above the ground.
2.
Tilt the trimmer head.
3.
Cut with the end of the trimmer line around objects in
the work area.
CAUTION:
Cut grass. Other objects that
are hit by the trimmer line, increases the
wear on the trimmer line.
12
756 - 001 - 24.10.2018