Husqvarna 520iLX Owner Manual - Page 9

1. Make sure that the power trigger is locked when the lock is in its original position. The cutting attachment guard stops objects that ejects in the direction of the operator. It also prevents injuries that occur if you touch the cutting attachment. 1. Stop the motor. 2. Do a visual check for damages, for example cracks. 2. Push the power trigger lockout forward (A) and down. Hold the power trigger lockout against the handle (B) and make sure that it returns to its original position when you release it. B A 3. Make sure that the power trigger and the power trigger lockout moves freely and that the return springs operate properly. 4. Start the product, refer to To start the product on page 12. 5. Push the power trigger fully to apply full speed. 6. Release the power trigger and make sure that the cutting attachment stops and remains still. To do a check of the cutting attachment guard WARNING: Do not use a cutting attachment without an approved and correctly attached cutting attachment guard. Always use the recommended cutting attachment guard for the cutting attachment that you use, see Accessories on page 18. If an incorrect or faulty cutting attachment guard is attached this can cause serious personal injury. 3. Replace the cutting attachment guard if it is damaged. Battery safety WARNING: Read the warning instructions that follow before you use the product. • Only use the BLi200 battery. Refer to Technical data on page 17. The battery is software encrypted. • Use the BLi200 battery that is rechargeable as a power supply for the related Husqvarna products only. To prevent injury, do not use the battery as a power supply for other devices. • Risk of electrical shock. Do not connect the battery terminals to keys, coins, screws or other metal. This can cause a short circuit of the battery. • Do not use non-rechargeable batteries. • Do not put objects into the air slots of the battery. • Keep the battery away from sunlight, heat or open flame. The battery can cause burns and/or chemical burns. • Keep the battery away from microwaves and high pressure. • Do not try to disassemble or break the battery. • If the battery leaks, do not let the liquid touch your body or eyes. If you have touched the liquid, clean the area with a large quantity of water and soap, and get medical aid. If you get liquid in your eyes, do not rub but flush with water for a minimum of 15 minutes and get medical aid. • Use the battery in temperatures between -10 °C (14 °F) and 40 °C (114 °F). • Do not clean the battery or the battery charger with water. Refer to To clean the product, the battery and the battery charger on page 14. • Do not use a defective or damaged battery. • Keep batteries in storage away from metal objects such as nails, screws or jewelry. • Keep the battery away from children. 756 - 001 - 24.10.2018 9