Husqvarna 520iLX Owner Manual - Page 13
To stop the product
View all Husqvarna 520iLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
4. Use 80% speed when you cut and clear vegetation. This decreases the wear on the trimmer head and trimmer line. To cut the grass 1. Make sure that the trimmer line is parallel to the ground when you cut the grass. 1. Push the SavE button to start the function. The green LED comes on to show that the function is on. 2. Do not push the trimmer head to the ground. This can cause damage to the product. 3. Move the product from side to side when you cut grass. Use full speed. 2. Push the SavE button again to stop the SavE function. To change the operation direction of the trimmer head It is possible to change the operation direction of the trimmer head. This can be done at full speed or at stop position. In the factory, the trimmer head is set to turn clockwise. The green LED is off when the trimmer head turns clockwise. 1. Push the operation direction button to make the trimmer head turn counterclockwise. The green LED is on when the trimmer head turns counterclockwise. To sweep the grass The airflow from the rotating trimmer cord can be used to remove cut grass from an area. 1. Hold the trimmer head and its cord parallel to the ground and above the ground. 2. Apply full throttle. 3. Move the trimmer head from side to side and sweep the grass. WARNING: Clean the trimmer head cover each time you assemble new trimmer cord to prevent unbalance and vibrations in the handles. Also do a check of the other parts of the trimmer head and clean it if necessary. To start the SavE function The product has a power saving function. The SavE function gives the longest operation time from the battery. Note: It is easier to tap out the trimmer line to make it longer when the trimmer head turns clockwise. Automatic shutdown function The product has a shutdown function that stops the product if the product is not used. The green LED for start/stop indication goes off and the product stops after 120 seconds. To stop the product 1. Release the power trigger or the power trigger lockout. 2. Push the start/stop button until the green LED is off. 3. Push the release buttons on the battery and pull the battery out. 756 - 001 - 24.10.2018 13