Husqvarna 525P4S Operation Manual - Page 16
Filling with oil, Assembling and dismantling the two-piece shaft, Assembly:, Dismantling:
View all Husqvarna 525P4S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Filling with oil ASSEMBLY • Before using the unit, tighten the knob securely. • Open the cap on top of the bar head Dismantling: Loosen the coupling by turning the knob (at least 3 times). • Fill with Husqvarna saw chain oil. • Refit the cap. Assembling and dismantling the two-piece shaft 525P5S • Push and hold the button (C). While securely holding the engine end, pull the attachment straight out of the coupling. Assembly: • Loosen the coupling by turning the knob counterclockwise. • Align the tab of the attachment (A) with the arrow on the coupling (B). B A • Push the attachment into the coupling until the attachment snaps into place. C Fitting the impact guard Fit the guard with three screws. Tighten the screws to 30 ft/lbs. (4 Nm). After the machine has been in use for around 20 hours, re-tighten the screws to 4 Nm. 16 - English