Husqvarna 525P4S Operation Manual - Page 3

CONTENTS Contents KEY TO SYMBOLS Symbols 2 CONTENTS Contents 3 Note the following before starting 3 INTRODUCTION Dear Customer 4 WHAT IS WHAT? What is what 5 GENERAL SAFETY PRECAUTIONS Important 6 Personal protective equipment 6 Machine′s safety equipment 7 ASSEMBLY Fitting the cutting head 15 Fitting the bar and chain 15 Adjusting the harness 15 Filling with oil 16 Assembling and dismantling the two-piece shaft . 16 Fitting the impact guard 16 FUEL HANDLING Fuel safety 17 Fuel 17 Fueling 18 STARTING AND STOPPING Check before starting 19 Filling with oil 19 Starting and stopping 19 WORKING TECHNIQUES General working instructions 21 MAINTENANCE Carburettor 24 Muffler 24 Cooling system 24 Spark plug 25 Air filter 25 Gear 25 Maintenance schedule 26 TECHNICAL DATA Technical data 27 EC Declaration of Conformity 28 Note the following before starting: Please read the operator's manual carefully. WARNING! Long-term exposure to noise ! can result in permanent hearing impairment. So always use approved hearing protection. WARNING! Under no circumstances may ! the design of the machine be modified without the permission of the manufacturer. Always use original accessories. Non-authorized modifications and/or accessories can result in serious personal injury or the death of the operator or others. WARNING! A pole saw is a dangerous ! tool if used carelessly or incorrectly and can cause serious, even fatal injuries. It is extremely important that you read and understand the contents of this Operator's Manual. English - 3