Husqvarna 536LiL Owners Manual - Page 13
Assembly
View all Husqvarna 536LiL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Fitting the loop handle ASSEMBLY • Tighten the knob. Li-ion • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft. Assembling the guard. • Slide the spacer into the slot in the loop handle. • Fit the nut, knob and screw. Do not overtighten. • Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob. Fitting the handlebar Li-ion Li-ion • Fit the correct trimmer guard (A) for use with the trimmer head. 2 1 • Position the handlebar as shown. Fit the mounting components and tighten the knob lightly. A • Put on the harness and hang the machine from the support hook. Now make a final adjustment so that the machine is in a comfortable working position when it hangs from the harness. • Hang the trimmer guard on the hook on the plate holder (1). Bend the guard around the shaft and tighten it with the bolt (2) on the opposite side of the shaft. Adjusting the harness and trimmer WARNING! When using a trimmer it must ! always be hooked securely to the harness. Otherwise you will be unable to control the trimmer safetly and this can result in injurytp yourselfor others. never use a harness with a defectivequick release. English - 13