Husqvarna 536LiL Owners Manual - Page 15
Battery Handling
View all Husqvarna 536LiL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
BATTERY HANDLING Battery status The display shows the battery capacity and if there are any problems with the battery. The battery capacity is displayed for 5 seconds after the machine is switched off or the battery indicator button is pressed. The warning symbol on the battery is lit when an error has occurred. See fault codes. 123 4 The battery must be charged before using it the first time. The battery is only 30% charged when delivered. • Put the battery in the battery charger. Make sure that the battery is connected to the battery charger. LED lights Battery status All LEDs are lit Fully charged (75-100%). LED 1, LED 2, LED 3 are The battery is 50%-75% lit. charged. LED 1, LED 2 are lit. The battery is 25%-50% charged. LED 1 is lit. The battery is 0%-25% charged. LED 1 flashes The battery is empty. Charge the battery. Battery charger WARNING! Risk of electric shock and ! short circuiting. Use approved and intact wall sockets. Make sure that the cable is not damaged. Replace cable if it appears to be damaged in any way. Connect the battery charger • Connect the battery charger to the voltage and frequency specified on the rating plate. Put the electric plug in a earthed socket-outlet. The LED on the battery charger flashes green once. • The green charging light on the charger is lit when the battery is connected to the battery charger. • When all LEDs are lit the battery is fully charged. 1 23 4 • Pull out the plug. Never jerk the power supply cable to disconnect it from the wall socket. • Remove the battery from the battery charger. Charging status Lithium-ion batteries can be charged at whatever charging level. The charging process can be cancelled or started whatever the battery's charge level is. The battery is not damaged. A fully charged battery will not lose its charge even when the battery is left in the charger. The battery will not be charged if the battery temperature is over 50 °C (122 °F). 1 23 4 • The battery will not be charged if the battery temperature is over 50 °C (122 °F). In that case the battery charger will actively cool down the battery. Connect the battery to the battery charger Regularly check that the battery charger and the battery are intact. See also instructions under the heading Maintenance. LED display Charging status LED 1 flashes The battery is 0%-25% charged. LED 1 is lit, LED 2 flashes. The battery is 25%-50% charged. LED 1, LED 2 are lit, LED The battery is 50%-75% 3 flashes charged. LED 1, LED 2, LED 3 are Battery is 75%-100% lit, LED 4 flashes charged LED 1, LED 2, LED 3, LED 4 are lit. When all the LEDs are lit on the battery, it is fully charged. English - 15