Husqvarna 572 XP Owner Manual - Page 10
Operation
View all Husqvarna 572 XP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
4. Install the saw chain correctly around the drive sprocket and put it in the groove on the guide bar. WARNING: Always use protective gloves when you assemble the saw chain. 5. Make sure that the edges of the cutters point forward on the top edge of the guide bar. 6. Align the hole in the guide bar with the chain adjuster pin and install the clutch cover. 7. Tighten the bar nuts finger tight. 8. Tighten the saw chain. Refer to To adjust the tension of the saw chain on page 28 for instructions. 9. Tighten the bar nuts. Note: Some models have only 1 bar nut. Introduction Operation 10. Do a check of the saw chain tension. WARNING: Read and understand the safety chapter before you use the product. To do a function check before you use the product 1. Make sure that the chain brake operates correctly and that it is not damaged. 2. Make sure that the right hand guard is not damaged. 3. Make sure that the throttle lockout operates correctly and that it is not damaged. 4. Make sure that the start/stop switch operates correctly and that it is not damaged. 5. Make sure that there is no oil on the handles. 6. Make sure that the vibration damping system operates correctly and that it is not damaged. 7. Make sure that the muffler is correctly attached and that it is not damaged. 8. Make sure that all parts of the product are correctly attached and not damaged or missing. 9. Make sure that the chain catcher is correctly attached. 34 6,8 7 10 2 19 Fuel This product has a two-stroke engine. CAUTION: Incorrect type of fuel can result in engine damage. Use a mixture of gasoline and two-stroke oil. Premixed fuel • Use Husqvarna premixed alkylate fuel for best performance and extension of the engine life. This fuel contains less harmful chemicals compared to regular fuel, which decreases harmful exhaust fumes. The quantity of remains after combustion is lower with this fuel, which keeps the components of the engine more clean. To mix fuel Gasoline • Use good quality unleaded gasoline with a maximum of 10% ethanol contents. 10 140 - 007 - 04.06.2020