Husqvarna AUTOMOWER 450X EPOS Owner Manual - Page 19

Note: The operation capacity is approximate and is calculated for flat and open work area. If the work area has a lot of slopes or obstacles, you need to increase the Schedule settings. Model Automower® 450X/ 450XH EPOS Approximate operation capacity, m2/h / ft2/h 208 / 2240 Example: A lawn of 3000 m2 / 32000 ft2, cut with an Automower® 450X/450XH EPOS. 3000 m2 / 208 ≈ 14.5 h. 32000 ft2 / 2240 ≈ 14.5 h. Days / week h / day Schedule settings 7 14.5 7:00 - 21:30 / 7:00 am - 9:30 pm 3.9.2 Cutting height In the Operation's menu it is possible to change the settings of the Weather timer, ECO mode and Spiral cutting. 3.9.4.1 Spiral cutting If the product enters an area where it senses the grass is longer than average, it can change the movement pattern to Spiral cutting. This means that the product mows in a spiral pattern to faster cut the area with longer grass. It is possible to set the intensity of the Spiral cutting. Very low / Low intensity means that Spiral cutting begins less often. High / Very high intensity means that Spiral cutting begins more often. Note: Spiral Cutting does not start in slopes steeper than 15%. The cutting height is set individually for each work area. The cutting height can be set to 20-60 mm / 0.8-2.4 in. 3.9.3 Pattern The settings for the systematic cutting is set for each work area. You can do these settings: • Set the pattern for how the product operates. • Set the direction of the pattern. • Enable or disable the Border mowing where the product cuts around the work area 2-3 times along the virtual boundary. • Set the type of the Border mowing. With Fixed border mowing the product always operates in the same paths to keep a sharp border around the work area. With Variable border mowing, the product operates in different paths to decrease the risk of track marks along the virtual boundary. 3.9.4 Operation 3.9.4.2 Weather timer Weather timer automatically adjust the cutting time to the growth of the grass. The product is not permitted to operate more than the schedule settings. Note: When using Weather timer, it is recommended to make as much operating time as possible available for Weather timer. Do not restrict the schedule more than necessary. The first operation of the day is set by the schedule settings. The product always complete 1 mowing cycle, and then Weather timer selects if the product will continue to operate or not. Note: Weather timer is reset if the product does not operate for more than 50 hours, or if a Reset of all user settings is done. Weather timer is not changed if a Reset of schedule settings is done. 3.9.4.3 ECO mode If ECO mode is enabled, it switches off the signal in the charging station, when the product is parked or is charging. 1970 - 001 - 10.10.2022 Installation - 19