Husqvarna AUTOMOWER 450XH EPOS Owner Manual - Page 6
Introduction, Support, System description, Product description, Mowing technique
View all Husqvarna AUTOMOWER 450XH EPOS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2 Introduction Serial number: Product number: PIN code: The serial number and the product number are on the product rating plate and on the product carton. • Register your product on www.husqvarna.com. Enter the serial number of the product, the product number and the date of purchase to register your product. 2.1 Support For support about the product, speak to your Husqvarna servicing dealer. 2.2 System description The system contains a robotic lawn mower, a charging station and a reference station. The robotic lawn mower and reference station uses the technology with satellite signals to position the robotic lawn mower correctly, this means that boundary wires are not necessary. The reference station is stationary and sends correction data to the robotic lawn mower to get an accurate position of the robotic lawn mower. The virtual work area for the product is made in the Automower® Connect app. The product is operated and waypoints are added to make a map in the app. Refer to System overview on page 7. The operator selects the operation settings in the Automower® Connect app. The app shows the selected and possible operation settings, and the operation mode of the product. 2.3.1 Mowing technique The frequent cutting technique improves the grass quality and decreases the use of fertilizers. Collection of grass is not necessary. 2.3.2 Find the charging station The product operates until the battery state of charge is low or until the work area is cut, then the product starts to go to the charging station. The product uses EPOS guidance with satellite signals to find a path to the charging station. This decreases the wear on the lawn and the time to find the charging station. 2.3 Product description Note: Husqvarna regularly updates the appearance and function of the products. Refer to Support on page 6. 2.3.3 Connectivity Automower® Connect is an app that you can use to install the product and to select the operation settings of the product. Refer to Automower® Connect on page 14. The product is a robotic lawn mower. The product has a battery power source and cuts grass automatically. It continuously alternates between mowing and charging. The movement pattern of the product can be set to random or systematic. The virtual boundary specifies the work area where the product is allowed to operate. The satellite receiver in the product senses when it is approaching the virtual boundary. When the product hits an obstacle or approaches the virtual boundary the product selects a new direction. 6 - Introduction 1970 - 001 - 10.10.2022