Husqvarna HUV4414G Owners Manual - Page 18
Park Brake Warning light, Front Axle Control, Differential Lock Control, Controls and Indicators
View all Husqvarna HUV4414G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Controls and Indicators 5 797 Figure 6 Park Brake Handle PARK BRAKE WARNING LIGHT The park brake warning light (10) is located on the instrument panel just to the left of the steering column (Figure 5). The warning light indicates that the park brake has been engaged. The vehicle should never be driven with the park brake engaged. If the warning light remains on after the park brake has been fully disengaged, have a trained technician check the vehicle. FRONT AXLE CONTROL The front drive unit engagement lever (3) is located on the right side of the instrument panel (Figure 5). The handle has two positions marked 4X4 and 4X2. Push the handle up to engage the front wheel drive unit or push the handle down to disengage the unit. The engagement lever was designed to be shifted while the vehicle is in motion so momentum is not lost while operating on slippery terrain. The lever should also be disengaged while the vehicle is in motion. WARNING • Do not operate the vehicle on improved surfaces (concrete, asphalt, etc.) in "4X4" mode. Doing so increases steering effort, tire wear, and shifting effort. DIFFERENTIAL LOCK CONTROL The rear differential lock control handle (4) is located on the right side of the instrument panel (Figure 5). The handle has two positions marked DIFF with a locked padlock icon and DIFF with an unlocked padlock icon. Push the handle up to engage the differential lock or pull the handle down to disengage the differential lock. Page 16 2009 HUV 4214, HUV 4414, andHUV 4414-XP Owner's Manual