Husqvarna HUV4414G Owners Manual - Page 40
See following NOTE., Remove Engine Oil Filter, Coat Rubber Seal, Add Engine Oil
View all Husqvarna HUV4414G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Engine Oil 26 Figure 18 Remove Engine Oil Filter 27 Figure 19 Coat Rubber Seal 4. Use a clean, lint-free rag to wipe the oil filter port flange surface clean where the oil filter gasket seats. 5. To help seal the new oil filter to the oil port flange, apply a light coat of white lithium NLGI Number 2 grease (Dow Corning® BR2-Plus or equivalent) or new engine oil to the rubber seal around the outside surface of the filter before attaching it to the oil filter port (Figure 19). Install the new oil filter onto the engine oil filter port. See following NOTE. NOTE: Use only engine-compatible oil filters designed for your engine. 6. Tighten the oil filter by hand 2/3 turn after gasket contact. Do not use a band wrench or channel lock pliers. 806 Page 38 Figure 20 Add Engine Oil 2009 HUV 4214, HUV 4414, andHUV 4414-XP Owner's Manual