Husqvarna K 535i Owner Manual - Page 16
BH CJ DK FL AR EA
View all Husqvarna K 535i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
3. Remove the nut that holds the trimmer head and the drive disc. 3. Put the locking pin (B) in the hole to lock the shaft. 4. Put the saw blade (C) and the support flange (D) on the output shaft. E D C A 4. Remove the trimmer head. Assembly of the saw blade guard and the saw blade To attach the saw blade guard (535iFR) 1. Attach the holder (A) and bracket (B) with 2 bolts (C) on the gear housing (D). 2. Attach the saw blade guard (E) with 4 bolts (F) in the holder (A). B C D A F E B 5. Make sure that the drive disc and support flange engages correctly in the center hole of the grass blade. 6. Attach the locknut (E). 7. Tighten the locknut with the socket wrench. Hold the shaft of the socket wrench near the blade guard. Tighten in the opposite direction to how the cutting attachment rotates. Tighten it to a torque of 35-50 Nm. To remove the saw blade guard (535iFR) 1. Remove the 4 bolts (L) from the holder (R) and remove the saw blade guard (A). H J K R L A 2. Remove the 2 bolts (J) on the gear housing (K).Remove the holder (R) and the bracket (H). To attach the saw blade (535iFR) 1. Put the drive disc (A) on the output shaft. 2. Turn the output shaft to align 1 of the holes in the drive disc with the related hole in the gear housing. To remove the saw blade (535iFR) 1. Put the locking pin (C) into the hole to lock the shaft. 2. Remove the nut the nut (G). 16 609 - 006 - 17.08.2020