Husqvarna K 535i Owner Manual - Page 9
To start the product on, Troubleshooting
View all Husqvarna K 535i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
carried out correctly and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest servicing dealer. WARNING: Never use a product with defective safety components. The product's safety equipment must be inspected and maintained as described in this section. If your product fails any of these checks, contact your service agent to get it repaired. 2. Press the power trigger and make sure that it goes back to its initial position when you release it. A B CAUTION: All servicing and repair work on the machine requires special training. This is especially true of the machine′s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent. 3. Make sure that the power trigger and the lock moves freely and that the return spring operates correctly. C A B To do a check of the power trigger lockout The power trigger lockout prevents accidental operation. When you push the power trigger lockout forward (A) and then press the power trigger lockout against the handle (B), the power trigger (C) is released. When you release the handle, the power trigger and the power trigger lockout move back to their initial positions. This movement is operated by independent springs. C A 4. Start the product, refer to To start the product on page 20. 5. Apply full speed. 6. Release the power trigger and make sure that the cutting attachment stops fully. To do a check of the user interface 1. Push and hold the start/stop button (A). B 1. Make sure that the power trigger is locked when the lock is in its initial position. C B A a) The product is on when the LED (B) is on. b) The product is off when the LED (B) is out. 2. If the warning indicator (C) comes on or flashes, refer to Troubleshooting on page 27. To do a check of the vibration damping system (535iRXT, 535iRX) The vibration damping system decreases vibration in the handles to a minimum which makes the operation easier. The vibration damping system of the product 609 - 006 - 17.08.2020 9