Husqvarna LE221R Owner Manual - Page 19

Transportation, storage and disposal Introduction WARNING: To prevent unintentional start during transport turn the safety key to "0", remove the battery and wait at least 5 seconds. To set the product in transport position 1. Remove the grass catcher (if installed). 2. Loosen the lower knobs. 3. Move the knobs to the lower end of the grooves on the left and the right side of the product. 4. Loosen the upper knobs. 5. Fold the handle. 428 - 002 - Transportation • The Dangerous Goods Legislation requirements apply to the contained Li-ion batteries. • For commercial transports special requirements on package and labels must be obeyed. • Make sure that you obey the regulations for dangerous material when you prepare the product for transport. Local regulations can apply. • Always remove the battery for transport. • Put tape on the battery connectors and make sure that the battery cannot move around during transport. • Attach the product during transport. Storage • Always remove the battery for storage. • To prevent accidents, make sure that the battery is not connected to the product during storage. • Keep the battery charger in a closed and dry space. • Keep the battery and the battery charger in a dry space where there is no moisture or frost. • Disconnect the battery from the battery charger during storage. • Do not keep the battery where static electricity can occur. Do not keep the battery in a metal box. • Keep the battery where the temperature is between 5°C and 25°C and out of sunlight. • Keep the battery charger where the temperature is between 5°C and 45°C and out of sunlight. • Make sure that the battery is charged to 30% - 50% before you put it in storage for long periods. 19