Husqvarna MZ54ROPS Owner Manual - Page 12
Rops Installation, Tools Required
![]() |
View all Husqvarna MZ54ROPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
A S S E M B LY NOTE: For illustration purposes, the unit is shown with parts removed. No disassembly is needed for the following installations. Tools Required • Wrench 15/16" (2) Rops Installation 1. Secure the side tubes (1) to the frame using four bolts (2), washers (3) and lock nuts (4), 2. Install the top loop (5) to both side tubes with two bolts (6) and nuts (7) so that the top loop folds to the rear of the unit. 3. Insert the ROPS pins (8) into the top loop brackets to set the desired position. Secure the lanyard (9) and the ROPs pin (10) on the opposite side. 5 7 9 10 6 8 4 3 1 2 4 3 2 WARNING! Keep the ROPS in the upright locked position and use the seat belt. When the ROPS must be folded down, do not use the seat belt and operate with extra care. 12
![](/manual_guide/products/husqvarna-mz54rops-owner-manual-c1c57d5/12.png)