Husqvarna MZ54ROPS Owner Manual - Page 28
Cleaning, Caster Wheels, Anti-scalp Rollers
View all Husqvarna MZ54ROPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
MAINTENANCE Caster Wheels Check every 200 hours. Check that wheels turn freely. Foam filled tires or solid tires will void the warranty. To replace, remove the nut and caster bolt. Pull the wheel out of the yoke and take care with the spacer. Install in reverse order. Tighten the caster bolt and torque to 45 ft-lbs (61 Nm). Cleaning Regular cleaning, especially under the mower deck, will increase the machine's life-span. Clean the machine directly after use (after it is cooled), before the debris sticks. Do not spray water on the top of the mower deck. Use compressed air to clean the top side of the mower deck. Do not use a high pressure washer or steam cleaner. Avoid spraying engine and electrical components with water. Clean the underside of the deck with normal water pressure. Do not rinse hot surfaces with cold water. Let unit cool before washing. CAUTION! Always wear eye protection when cleaning and washing. Hardware Check daily. Examine the machine for loose or missing hardware. NOTE: Tire must turn freely but axle spacers must not. If wheels do not turn freely take the unit to the dealer for service. Anti-scalp Rollers Anti-scalp rollers are correctly adjusted when they are slightly off of the ground when the deck is at the desired cutting height. Anti-scalp rollers keep the deck in the correct position to prevent scalping in most terrain conditions. Do not adjust the rollers to support the deck. The rollers must be approximately 1/4" (6.5 mm) from ground. IMPORTANT INFORMATION Adjust anti-scalp rollers with the mower on a flat level surface. To avoid deck damage, the anti-scalp rollers must not be adjusted to support the deck. 28