Husqvarna R 120S Owners Manual - Page 11

Transport - belt

Page 11 highlights

SAFETY INSTRUCTIONS • Be especially careful when handling battery acid. Acid on the skin can cause serious corrosive injuries. In the event of spillage on the skin wash immediately with water. • Acid in the eyes can cause blindness. Rinse immediately with plenty of water for at least 20 minutes and contact a doctor immediately. • Take care with battery maintenance. Explosive gases form in the battery. Never perform maintenance on the battery while smoking or in the vicinity of open flames or sparks. This can cause the battery to explode and cause serious injuries. • Reduce the risk of fire by removing grass, leaves and other debris that may have fastened on the machine. Allow the machine to cool before putting it in storage. • Make sure all nuts and bolts are tightened correctly and that the equipment is in good condition. • Do not modify safety equipment. Check regularly to be sure it works properly. The machine must not be driven if protective plates, protective covers, safety switches or other protective devices are not fitted or are defective. • Observe the risk of injury caused by moving or hot parts if the engine is started with the engine cover open or protective cowlings removed. • Do not change the setting of governors. If you run too fast, you risk damaging the machine components. • Never use the machine indoors or in spaces lacking proper ventilation. Exhaust fumes contain carbon monoxide, an odorless, poisonous and highly dangerous gas. Transport IMPORTANT INFORMATION The parking brake is not sufficient to lock the machine during transport. Ensure you secure the machine firmly to the transporting vehicle. • The machine is heavy and can cause serious crush injuries. Take extra care when loading it onto or off a vehicle or trailer. • Use a trailer appropriate for this machine for transporting the machine. Activate the parking brake, and secure the machine using approved fasteners, such as tension belts, chains or ropes when transporting. • Check and observe local road traffic regulations before transporting or driving the machine on roads. • Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting. • Never make adjustments with the engine running. • The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer. • The blades are sharp and can cause cuts. Wrap the blades or wear protective gloves when handling them. • Check regularly that the parking brake works. Adjust and maintain as required. English - 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

English
– 11
SAFETY INSTRUCTIONS
Be especially careful when handling battery acid. Acid on
the skin can cause serious corrosive injuries. In the event
of spillage on the skin wash immediately with water.
Acid in the eyes can cause blindness. Rinse immediately
with plenty of water for at least 20 minutes and contact a
doctor immediately.
Take care with battery maintenance. Explosive gases
form in the battery. Never perform maintenance on the
battery while smoking or in the vicinity of open flames or
sparks. This can cause the battery to explode and cause
serious injuries.
Make sure all nuts and bolts are tightened correctly and
that the equipment is in good condition.
Do not modify safety equipment. Check regularly to be
sure it works properly. The machine must not be driven if
protective plates, protective covers, safety switches or
other protective devices are not fitted or are defective.
Observe the risk of injury caused by moving or hot parts if
the engine is started with the engine cover open or
protective cowlings removed.
Do not change the setting of governors. If you run too fast,
you risk damaging the machine components.
Never use the machine indoors or in spaces lacking
proper ventilation. Exhaust fumes contain carbon
monoxide, an odorless, poisonous and highly dangerous
gas.
Stop and inspect the equipment if you run over or into
anything. If necessary, make repairs before starting.
Never make adjustments with the engine running.
The machine is tested and approved only with the
equipment originally provided or recommended by the
manufacturer.
The blades are sharp and can cause cuts. Wrap the
blades or wear protective gloves when handling them.
Check regularly that the parking brake works. Adjust and
maintain as required.
Reduce the risk of fire by removing grass, leaves and
other debris that may have fastened on the machine.
Allow the machine to cool before putting it in storage.
Transport
The machine is heavy and can cause serious crush
injuries. Take extra care when loading it onto or off a
vehicle or trailer.
Use a trailer appropriate for this machine for transporting
the machine. Activate the parking brake, and secure the
machine using approved fasteners, such as tension belts,
chains or ropes when transporting.
Check and observe local road traffic regulations before
transporting or driving the machine on roads.
IMPORTANT INFORMATION
The parking brake is not sufficient to lock the machine
during transport. Ensure you secure the machine firmly to
the transporting vehicle.