Husqvarna R 120S Owners Manual - Page 23
Service position for the cutting unit
View all Husqvarna R 120S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Maintenance Open the engine cover. Check that the cooling intake is free from leaves, grass and dirt. 5 Release the clip on the right side of the mower deck and lift the cover off the mower deck. Check the air duct, located on the inside of the engine cover, ensure it is clean and does not rub against the cooling air intake. A blocked cooling intake will interfere with the cooling of the engine, which can damage the engine. WARNING! The cooling air intake rotates ! when the engine is running. Do not allow hands, clothing, jewelry or any other items to come in contact with the engine fan while the engine is running. Mind your fingers. Service position for the cutting unit The cutting deck can be removed in order to facilitate cleaning and servicing. To remove the cutting deck proceed as follows: 1 Position the machine on flat ground. 2 Apply and lock the parking brake. 6 Loosen the spring on the drive belt's belt idler by loosening the handle. 7 Lift of the drive belt. 8 Grip the top tubular construction of the unit and pull out the unit until it stops. 9 Remove the pin in the equipment frame. 3 Check that the lever for setting the cutting height is in the S position. 10 Loosen the stay from the cutting deck. 4 Put the lifting lever in the mowing position. 11 Pull out the cutting unit. 12 Lift off the deck and lean it against the machine or a wall. English - 23