Husqvarna R 120S Owners Manual - Page 24
Checking the blades - belt replacement
View all Husqvarna R 120S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Maintenance Fitting the cutting head 1 Place the belt under the stay of the cutting deck. 8 Fit the belt according to the picture. 2 Make sure the lifting lever comes above the cutting deck grip. 9 Tension the belt with the belt adjuster. 3 Fit the cutting deck's pipe together with the deck frame's pipe. 10 Fit the front cover. 11 Set the cutting height control to one of the positions 1-5 4 Push the cutting deck in and make sure the guide bolts fit into the grooves on the deck frame, one on each side. Checking the blades To achieve the best mowing results it is important that the blades are undamaged and well-sharpened. Check that the blades' attachment screws are tight. • Put the unit in the service position, see Service position for the cutting unit. 5 Fit the cutting deck lock. 6 Grab the pipes and push the deck in. 7 Push the deck until you feel the pipes touch bottom. IMPORTANT INFORMATION Replacing or sharpening the blades should be conducted by an authorised service workshop. The blades should be balanced after sharpening. Damaged blades should be replaced when hitting obstacles that result in a breakdown. Let the service centre assess whether the blade can be sharpened or must be replaced. WARNING! Do not use blades that are ! cracked, chipped, or otherwise show signs of damage or severe wear. Replace the blades. The risk increases if the blades are poorly balanced. 24 - English