Husqvarna SG 13 Owners Manual - Page 32

MAINTENANCE Cleaning the cyclone filter The cyclone filter collects the largest contaminant particles, which collect in the container. When you can see a layer of dirt at the bottom of the container, the cyclone housing (4), air channels and air intake screen (3) must be cleaned. Remove the three screw holding the cyclone housing. Remove the housing with the air intake screen and remove the air channels. The air channels may remain in the upper portion or follow along with the housing when removed. Clean the components. Use water, detergent and a washing-up brush. Dry carefully. IMPORTANT INFORMATION Exercise care when reassembling to avoid damaging anything. Make sure when mounting that the air intake screen fits exactly in its guide in the upper portion. Make sure the air channel ends up in the proper position. Refit the components. Place the air channels in the cyclone housing. Insert cyclone housing into position and make sure it fits in the upper portion. DO NOT use force; rather coax it into place before fitting the screws. 32 8011-188 8011-213 8011-212 8011-213