IBM 1352 User Guide - Page 59

PJL Re-Lock Sequence With A New Password Value %-12345X@PJL DEFAULT LRESOURCE:"flash:" LRWLOCK="xxxxxxxx"(0D)(0A) %-12345X This command requires the resources to be previously unlocked. The new password is represented by the value xxxxxxxx. Th UEL is again optional but recommended. After consulting Lexmark Technical Reference materials you may wish to expand the PJL sequences to include more than the examples above. To chain multiple PJL commands follow the following format: (UEL)(PJL COMMAND)(0A)(PJL COMMAND)(0A)(PJL COMMAND)(0A)(UEL or ENTER LANGUAGE) The normal printer action to any format problems or missing or extra symbols is to ignore the PJL command. This does make troubleshooting format errors difficult. Have patience! Note: Density and EconoMode PJL commands are ignored by the ST-9116. PCL Font Call Commands After PJL has unlocked the MICR FLASH resources, the ST-9116 uses standard PCL5e commands to print. The five resident Source Technologies MICR font resources are all bitmapped fonts and therefore cannot be scaled larger or smaller than the bitmapped images. These fonts can be called by either a PCL Font Selection String or by their ID. The commands are: E13B MICR FONT (10O(s0p8h8v0s7b360T (30802X The Selection String The ID Call SECURE NUMERIC (16C(s0p5h36.24v0s112T The Selection String (30043X The ID Call ICR SECURE (1O(s1p12v0s0b110T (30066X The Selection String The ID Call MICROPRINT (2Q(s1p0.96v0s0b1023T (30055X CMC7 MICR FONT 14Y(s0p8h8v0s0b361T (30803X The Selection String The ID Call The Selection String The ID Call Secure MICR Printer User's Guide July 2003  Source Technologies All rights reserved