IBM 419452u Installation Guide - Page 54

Table 4. Abbreviated list of POST error codes (continued) v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See the parts listing in the Problem Determination and Service Guide to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error code Description Action 00012000 Processor machine check error. 1. (Trained service technician only) Reseat the microprocessor. 2. Replace the following components one at a time, in the order shown, restarting the server each time: a. (Trained service technician only) Microprocessor b. (Trained service technician only) System board 00019701 Microprocessor x is not functioning Make sure that microprocessor x is or failed the built-in self-test. installed correctly. If the problem remains, call for service. 01298001 No update data for microprocessor 1. Update the BIOS code again 1. (see the Problem Determination and Service Guide on the IBM System x Documentation CD). 2. (Trained service technician only) Reseat the microprocessor. 3. (Trained service technician only) Replace the microprocessor. 01298101 Bad update data for microprocessor 1. 1. Update the BIOS code again (see the Problem Determination and Service Guide on the IBM System x Documentation CD). 2. (Trained service technician only) Reseat the microprocessor. 3. (Trained service technician only) Replace the microprocessor. 40 IBM System x3250 M2 Types 4190 and 4194: Installation Guide