IBM 4910-33S Installation Guide - Page 28
Add Driver to be Installed By WEPOS Install
![]() |
View all IBM 4910-33S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
b. Download the IBM SurePOS 300-33x SATA driver from the IBM Hardware Support web site at http://www.ibm.com/solutions/retail/store/support. c. Extract the files from the surepos300-33x-sata2kxp01020057.exe file. d. In the WEPOS_INSTALL subdirectory, create a subdirectory in the i386\system32\ subdirectory by the name of Si3112r. e. Copy the files extracted from the surepos300-33x-sata2kxp01020057.exe file to this subdirectory. Be sure the TxtSetup.oem file is copied as well. 6. Edit the TxtSetup.oem file. For your convenience, the entire file is shown in its own section for you to copy and paste into the TxtSetup.oem file. The changes to the base TxtSetup.oem file are noted below. 1) The [Disks] section must point to the backslash (\) for the path of the Tagfile and to the working directory (the last two parameters). i. [Disks] ii. disk1 = ″Silicon Image SiI 3x12 SATALink Driver Installation Disk″,\si3112.sys,\ 2) b. The [Defaults] section must point to the [SCSI] section entry. i. [Defaults] ii. SCSI = Si3112_XP 3) c. The [SCSI] section entry loads the driver a) [SCSI] ; HwComponent section b) Si3112_XP = ″Silicon Image SiI 3x12 SATALink Controller for Windows XP/Server 2003″, Si3112 c) Si3112_NT = ″Silicon Image SiI 3x12 SATALink Controller for Windows NT 4.0 and 2000″, Si3112 4) d. The entire TxtSetup.oem file contents with changes is shown in the section named TxtSetup.oem. 5) e. Be sure to save the changed TxtSetup.oem file in its original location; C:\WEPOS_INSTALL\i386\system32\Si3112r\TxtSetup.oem f. Change directory to the i386\system32 subdirectory. g. Edit the winpeoem.sif file with the notepad editor For your convenience, this file is shown in its own section in this document so you can copy and paste it into the winpeoem.sif file. The changes from the base file are shown below. Identify the location of the drivers by changing the following keyword values to the values shown (you can see the contents of the entire file in the section of this document named Winpeoem.sif: OemDriverRoot="" OemDriverDirs=Si3112r h. Be sure to save the changed winpeoem.sif file in the same location: C:\WEPOS_INSTALL\i386\system32\winpeoem.sif 2. Add Driver to be Installed By WEPOS Install Note: This section is based on the Microsoft documentation found on MSDN. To find this documentation, go to www.microsoft.com and search for "Adding Drivers to Be Installed by WEPOS Setup". This step describes the changes necessary for the WEPOS installation process to install the SATA driver on the hard drive with the operating system. a. Change the current directory to C:\WEPOS_INSTALL\setup. b. Create a subdirectory by the name of drivers. c. Change the current directory to C:\WEPOS_INSTALL\setup\drivers. d. Create a subdirectory by the name of SATA. e. Copy the SATA drivers you previously extracted into the C:\WEPOS_INSTALL\setup\drivers\SATA subdirectory. 14 SurePOS 300: Operating System Installation Guide Models 33x and x4x
![](/manual_guide/products/ibm-491033s-installation-guide-3019d73/28.png)