IBM 6269 User Guide - Page 93
Table 1. POST Error Codes continued, IBM Enhanced Diagnostics
UPC - 087944629900
View all IBM 6269 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Table 1. POST Error Codes (continued) Code Description Action 176 System cover has been removed. Type in the administrator password. If problem persists, have the computer serviced. 177 An inventory violation occurred, Type in the administrator password. such as a hardware component was If the problem persists, have the removed. This error message is part computer serviced. of the AssetCare and Asset ID features of the computer. 183 Administrator password required. Type the administrator password. 184 Asset control antenna not detected. Have the computer serviced. 186 System board or hardware security Have the computer serviced. error 187 Administrator password and Go to ""Starting the startup sequence has been cleared. Configuration/Setup Utility program" on page 68 and follow the instructions to set an administrator password and the startup sequence. 190 The computer chassis-intrusion No action is required. detector was cleared. This is an informational message. 20x Memory error Go to "IBM Enhanced Diagnostics program" on page 94 and follow the instructions to run diagnostics. 229 Level 2 cache error Have the computer serviced. 301 or 303 Keyboard error 1. Make sure the keyboard is properly connected. 2. If the keyboard is properly connected, have the computer serviced. 601 Diskette drive or controller error 1. Go to "IBM Enhanced Diagnostics program" on page 94 and if possible run the IBM Enhanced Diagnostics program. 2. If the problem persists, have the computer serviced. 602 Diskette IPL boot record not valid 1. The diskette might be defective. Try another diskette. 2. If the problem persists, have the computer serviced. Chapter 6. Troubleshooting 75