IBM 6500-V10 Maintenance Manual - Page 48

Chapter 1 Troubleshooting Display Messages Operator Panel Message 012 STRUCTURED FLD ERROR 013 ACTIVATE LOST 014 INVALID ACTIVATE Table 3. Message List Explanation Corrective Action Application software has violated structured data field parameters. The printer detects a twinax protocol communication error and reports the error. The printer detects a twinax protocol communications error and reports the error. Not a printer problem. Have the system administrator correct applications data or configuration. 1. Power off and unplug the printer. Check the twinax host data cable and twinax I/O cable connection at the CT board. Reseat the twinax host data cable connection and the twinax I/O cable connection at the CT board. 2. Disconnect the twinax auto-termination cable from the printer. Test the cable for the resistances shown on page 287. If resistances are not correct, replace the twinax auto-termination cable. 3. Plug in the printer and power it on. Send a print job to the printer. If the message appears, replace the twinax cable. 4. Send a print job to the printer. If the message appears, go to Communications Failures, page 211. 1. Power off and unplug the printer. Check the twinax host data cable and twinax I/O cable connection at the CT board. Reseat the twinax host data cable connection and the twinax I/O cable connection at the CT board. 2. Disconnect the twinax auto-termination cable from the printer or from the last device on this twinax port. Test the cable for the resistances shown on page 268. If the resistances are not correct, replace the twinax auto-termination cable. 3. Plug in the printer and power it on. Send a print job to the printer. If the message appears, replace the twinax cable. 4. Send a print job to the printer. If the message appears, go to Communications Failures, page 211. 48