IBM 6868 User Guide - Page 68

4. Use the arrow keys to make your selections and press Esc until you return to the Configuration/Setup utility program menu. 5. Select Save Settings from the Configuration/Setup utility menu and press Enter; then press Esc and follow the instruction on the screen to exit from the Configuration/Setup utility program. Setting Remote Administration You can remotely update the system programs, such as POST and BIOS, from a network server by enabling Remote Administration. If you have set an administrator password for your computer, the password does not have to be entered in order to remotely update programs. Consult your network administrator for information on setting up your network server to perform POST and BIOS updates. To set Remote Administration, follow these steps: 1. Start the Configuration/Setup utility program. See "Starting and using the Configuration/Setup Utility program" on page 43. 2. Select System Security and press Enter. 3. Select Remote Administration and press Enter. 4. To enable update remote administration, select Enabled. To disable, select Disabled. 5. Press Esc until you return to the Configuration/Setup utility program main menu. 6. Select Save Settings from the Configuration/Setup utility program menu; then press Esc and follow the instructions on the screen to exit from the Configuration/Setup utility program. Interrupt and DMA resources This section lists the settings for the default interrupt and direct memory access (DMA) resources for your computer. The interrupt and DMA settings might change if your computer is reconfigured. Interrupt request 0 1 2 3 4 5 6 7 8 9 54 IntelliStation User Guide System resource Timer Keyboard Interrupt controller Serial port Serial port Available Diskette Parallel port Real Time Clock ACPI