IBM 7026-H80 Service Guide - Page 205

Table 4. SPCN Error Codes (continued) Error Code Description 1021 7661 Missing fan 6 in power supply 2 1021 7690 Slow secondary I/O drawer fan 9 in cooling unit 1021 7691 Missing secondary I/O drawer fan 9 in cooling unit 1021 8400 VPD configuration problem 1021 8401 VPD access problem 1021 840A VPD +5 stuck high 1021 840B VPD +5 stuck low 1021 840D I/O type mismatch 1021 840E SPCN default configuration loaded 1021 840F I/O type not recognized 1021 8A00 A different I/O drawer is connected to the CEC 1021 9012 Invalid address 1021 9013 Invalid address 1021 9014 Invalid address mode Action/ Possible Failing FRU I/O drawer power supply 2 Location: U0.2-V2 1. Fan 9 (cooling unit) Location: U0.2-F9 2. Secondary fan controller Location U0.2-X2 3. Power distribution card Location U0.2-X1 Fan 9 (cooling unit) Location: U0.2-F9 1. Check for system firmware update. 2. Call service support. 1. Check for system firmware update. 2. Call service support. Secondary I/O backplane Location: U0.2-P1 Secondary I/O backplane Location: U0.2-P1 1. Check cabling 2. Set the I/O type to 85. See Power Control Network Utilities Menu on page 389. 3. Primary I/O backplane Location: U0.1-P1 User error 1. Check cabling 2. Set the I/O type to 85. See Power Control Network Utilities Menu on page 389. 3. Primary I/O backplane Location: U0.1-P1 Informational only 1. Check SPCN cabling 2. Secondary I/O backplane Location: U0.2-P1 1. Check SPCN cabling 2. Secondary I/O backplane Location: U0.2-P1 Update system firmware Note: Allow up to 30 minutes for update to take effect Chapter 5. Error Code to FRU Index 187