IBM 7026-H80 Service Guide - Page 379
Error Code, Description, Action, Possible Failing FRU, Read Progress Indicators From, Last System Boot
View all IBM 7026-H80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 379 highlights
Table 8. Common Firmware Error Codes (continued) Error Code Description Action/ Possible Failing FRU B1xx 4691 System firmware surveillance time out (System firmware to service processor interface failure) 1. Check for system firmware update Location: U0.1-P1/Y1 2. Go to the service processor main menu and select System Information Menu, then select Read Progress Indicators From Last System Boot. Begin your repair action with the error code or checkpoint immediately preceeding B1xx 4691. If a location code displays with the error code or checkpoint, replace the part at that location. If no location code is specified, and you have an 8-character error code, go to the "Checkpoint and Error Code Index" on page 165. If no location code is specified, and you have a 4-character checkpoint, go to "Firmware Checkpoints" on page 147 3. If the problem is not resolved, call service support. B1xx 4692 Operator panel task interface failure 1. Check for system firmware update Location: U0.1-P1/Y1 2. Call service support. B1xx 4693 Service processor firmware error 1. Check for system firmware updates. 2. The type and model field in the VPD module may be set incorrectly. The type and model field can be viewed using the service processor function ″Read VPD Image from Last System Boot″, which is option 1 in the "System Information Menu" on page 382. If the type and model field is not set correctly, call service support. 3. Call service support. B1xx 4694 System processor firmware failure 1. Check for system firmware update 2. Primary I/O backplane Location: U0.1-P1 Chapter 5. Error Code to FRU Index 361