IBM 72335LU Installation Guide - Page 28
Installing
UPC - 883436081535
View all IBM 72335LU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Memory hot-swap enabled LED Memory card/DIMM error LED Memory card power LED Memory hot-swap enabled LED: When this LED is lit, it indicates that hot-swap memory is enabled. Memory card/DIMM error LED: When this LED is lit, it indicates that a memory card or DIMM has failed. Memory card power LED: When this LED is off, it indicates that power is removed from the card and that you can remove the memory card and replace a failed DIMM. This LED will also turn off when the release levers are opened. Installing a DIMM To install additional DIMMs, complete the following steps: 1. Read the safety information that begins on page v and "Installation guidelines" on page 9. 2. If you are not hot-swapping a DIMM, turn off the server and peripheral devices, and disconnect the power cords and all external cables as necessary to replace the device. 3. Remove the server cover. 4. If you are hot-swapping a DIMM, make sure that the memory hot-swap enabled LED is lit. 16 IBM System x3850 M2 and System x3950 M2 Type 7141: Installation Guide