IBM 72335LU Installation Guide - Page 32
electricity.
![]() |
UPC - 883436081535
View all IBM 72335LU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Fan 4 Fan 1 V R M 3 CPU 3 Fan 5 Fan 2 CPU 4 Fan 6 Fan 3 V R M 4 Memory Cards V R 1 2M 1 CPU 1 CPU 2 V R Memory Cards M3 4 2 2. Microprocessor socket 2 must always contain either a heat-sink blank or a microprocessor and heat sink. 3. The microprocessor air-baffle must always be installed between microprocessor socket 1 and socket 2. To install an additional microprocessor, complete the following steps: 1. Read the safety information that begins on page v and "Installation guidelines" on page 9. 2. Turn off the server and peripheral devices, and disconnect the power cords and all external cables as necessary to replace the device. 3. Remove the server cover and bezel. Attention: When you handle static-sensitive devices, take precautions to avoid damage from static electricity. For details about handling these devices, see "Handling static-sensitive devices" on page 11. 4. Loosen the captive screws and rotate the media hood to the fully open position. 20 IBM System x3850 M2 and System x3950 M2 Type 7141: Installation Guide
![](/manual_guide/products/ibm-72335lu-installation-guide-0c8336a/32.png)