IBM 72335LU Installation Guide - Page 36

Installing, adapter - drivers

Get IBM 72335LU - System x3850 M2 PDF manuals and user guides
UPC - 883436081535
View all IBM 72335LU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

8. Turn the controller so that the keys align correctly with the slot. 9. Insert the controller into the connector by aligning the edges of the controller with the slots at the ends of the connector. Attention: Incomplete insertion might cause damage to the server or the ServeRAID-MR10k SAS controller. 10. Firmly press the controller straight down into the connector by applying pressure on both ends simultaneously. The retaining clips snap into the locked position when the controller is seated in the connector. 11. Install the battery in the divider that contains the battery holder. 12. Connect the battery cable to the ServeRAID-MR10k SAS controller. 13. Install the divider that contains the battery holder in the server. 14. Route the battery cable through the cable routing guides on the divider to the controller. 15. Rotate the adapter-retention bracket to the closed position. If you have other devices to install or remove, do so now. Otherwise, go to "Completing the installation" on page 26. Installing an adapter Note: For hot-pluggable adapters, make sure that the PCI Express hot-plug device driver is installed. For details, see the documentation that comes with the adapter. For more detailed instructions and information about installing PCI Express adapters, see the section about installing optional devices in the User's Guide on the IBM System x Documentation CD. To install a non-hot-plug or hot-plug PCI Express adapter, complete the following steps: 1. Read the safety information that begins on page v and "Installation guidelines" on page 9. 2. If the adapter is not hot-pluggable, turn off the server and peripheral devices, and disconnect the power cords and all external cables as necessary to remove or install the adapter. 3. Remove the server cover and determine which PCI Express expansion slot you will use for the adapter. 24 IBM System x3850 M2 and System x3950 M2 Type 7141: Installation Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
8.
Turn
the
controller
so
that
the
keys
align
correctly
with
the
slot.
9.
Insert
the
controller
into
the
connector
by
aligning
the
edges
of
the
controller
with
the
slots
at
the
ends
of
the
connector.
Attention:
Incomplete
insertion
might
cause
damage
to
the
server
or
the
ServeRAID-MR10k
SAS
controller.
10.
Firmly
press
the
controller
straight
down
into
the
connector
by
applying
pressure
on
both
ends
simultaneously.
The
retaining
clips
snap
into
the
locked
position
when
the
controller
is
seated
in
the
connector.
11.
Install
the
battery
in
the
divider
that
contains
the
battery
holder.
12.
Connect
the
battery
cable
to
the
ServeRAID-MR10k
SAS
controller.
13.
Install
the
divider
that
contains
the
battery
holder
in
the
server.
14.
Route
the
battery
cable
through
the
cable
routing
guides
on
the
divider
to
the
controller.
15.
Rotate
the
adapter-retention
bracket
to
the
closed
position.
If
you
have
other
devices
to
install
or
remove,
do
so
now.
Otherwise,
go
to
“Completing
the
installation”
on
page
26.
Installing
an
adapter
Note:
For
hot-pluggable
adapters,
make
sure
that
the
PCI
Express
hot-plug
device
driver
is
installed.
For
details,
see
the
documentation
that
comes
with
the
adapter.
For
more
detailed
instructions
and
information
about
installing
PCI
Express
adapters,
see
the
section
about
installing
optional
devices
in
the
User’s
Guide
on
the
IBM
System
x
Documentation
CD.
To
install
a
non-hot-plug
or
hot-plug
PCI
Express
adapter,
complete
the
following
steps:
1.
Read
the
safety
information
that
begins
on
page
v
and
“Installation
guidelines”
on
page
9.
2.
If
the
adapter
is
not
hot-pluggable,
turn
off
the
server
and
peripheral
devices,
and
disconnect
the
power
cords
and
all
external
cables
as
necessary
to
remove
or
install
the
adapter.
3.
Remove
the
server
cover
and
determine
which
PCI
Express
expansion
slot
you
will
use
for
the
adapter.
24
IBM
System
x3850
M2
and
System
x3950
M2
Type
7141:
Installation
Guide