IBM 72335LU Installation Guide - Page 34
microprocessor.
UPC - 883436081535
View all IBM 72335LU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Microprocessor Microprocessor orientation indicator Microprocessor connector Microprocessorrelease lever 11. Close the microprocessor-release lever to secure the microprocessor. Heat-sink retention clip Alignment posts 12. Remove the heat sink from its package and open the heat-sink retention clip: a. Release the heat-sink retention clip from the locked position. b. Rotate the heat-sink clip to its fully open position. 13. Remove the cover from the bottom of the heat sink. 14. Position the heat sink above the microprocessor and align the heat sink with the alignment posts; then, press on the top of the heat sink, rotate the heat-sink release lever, and move the lever to the locked position. 15. Install a VRM in the connector next to the microprocessor socket. Note: Make sure that the "Front" label on the VRM is facing the front of the server. 16. Replace the microprocessor air baffle between socket 1 and socket 2, if you removed it. 17. Rotate the media hood to the closed position and tighten the captive screws. 22 IBM System x3850 M2 and System x3950 M2 Type 7141: Installation Guide