IBM 847681U Hardware Maintenance Manual - Page 114
Refer to Table, with drives in bays 1 through 4
View all IBM 847681U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Before you can install drives in the Netfinity 3000 server, you might need to perform certain preinstallation activities. Some of the steps are required only during the initial installation of an option. 1. Remove the server side cover (see "Disconnecting cables and removing the side cover" on page 84). 2. Choose the bay in which you want to install the drive. (Refer to Table 4 on page 99 for the drive types and sizes available for each bay.) 3. Access the appropriate drive bays. Notes 1. In all models, drive bays 1 and 4 come with drives preinstalled. 2. In some models, drive bay 6 comes with a drive preinstalled. 3. Drive bays 2 and 3 have a bay panel and static shield installed. 4. If you remove a drive that has removable media and you do not intend to install a new drive immediately, reinstall the static shield and bay panel for that bay. To access drive bays 1 through 4, go to "Working with drives in bays 1 through 4" on page 107. To access drive bays 5 and 6, go to "Working with drives in Bays 5 and 6" on page 121. 4. Touch the static-protective bag containing the drive to any unpainted metal surface on the server; then, remove the drive from the bag. 5. Check the instructions that come with the drive, or contact your IBM reseller or IBM marketing representative to see if you need to set any switches or jumpers on the drive, or if you need to attach a tray to the drive. 106 Netfinity Server HMM