IBM 847681U Hardware Maintenance Manual - Page 76
object that is not a part of or permanently secured
View all IBM 847681U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
1. Remove the server side cover (see "Disconnecting cables and removing the side cover" on page 84). 2. Locate the two holes on the lower right edge of the rear of the server. 3. Insert the U-bolt through the rear panel; then, attach and tighten the nuts with an appropriately sized or adjustable wrench. 4. If you have completed installing the U-bolt and do not want to install any other internal options, replace the server side cover and reconnect all external cables and power cords. (See "Completing the installation" on page 77 if you need additional information.) 5. Thread the cable through the U-bolt and around an object that is not a part of or permanently secured to the building structure or foundation, and from which it cannot be removed; then, fasten the cable ends together with a lock. The following illustration shows an example of how this might work. Cable Padlock 68 Netfinity Server HMM