IBM 847681U Hardware Maintenance Manual - Page 22
Viewing the test log, SIMM/DIMM errors
![]() |
View all IBM 847681U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Viewing the test log Errors reported by the diagnostic test will be displayed by the program as a failed test. To view details of a failure or to view a list of test results, do the following from any test category screen: Press F3 to activate the log File Press F3 again to save the file to diskette or F2 to print the file. SIMM/DIMM errors : SIMM/DIMM error messages issued by the IBM PC Enhanced Diagnostics: Message 2xx-1y 2xx-2y Corrupt BIOS Test aborted by user Failure Found A memory error was detected in SIMM socket Y A memory error was detected in DIMM socket Y Information in BIOS is not as expected. Not able to find expected DMI information from BIOS. Memory controller chipset vendor ID does not match expected value. User stopped test. Recommended Actions Replace the SIMM in the socket identified by the last digit of the error code. Re-run the test. If the same error code occurs again, replace the system board. Replace the DIMM in the socket identified by the last digit of the error code. Re-run the test. If the same error code occurs again, replace the system board or where memory is on the processor card, replace the processor card. Reflash the BIOS. Replace the system board. Restart test. 14 Netfinity Server HMM
![](/manual_guide/products/ibm-847620u-hardware-maintenance-manual-4ef1215/22.png)