IBM 8486 User Guide - Page 58
Updating, Director
UPC - 000435839718
View all IBM 8486 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
You do not have to set any jumpers or configure the controller. However, you must install a device driver to enable the operating system to address the controller. For updated information about configuring the controller, see http://www.ibm.com/support/. Updating IBM Director If you plan to use IBM Director to manage the server, make sure you download the latest applicable IBM Director updates and interim fixes. To install the latest version of IBM Director and any other applicable updates and interim fixes, complete the following steps. Note: Changes are made periodically to the IBM Web site. The actual procedure might vary slightly from what is described in this document. 1. Check for the latest version of IBM Director: a. Go to http://www.ibm.com/eserver/xseries/systems_management/xseries_sm/dwnl.html. b. Follow the instructions on the Web page to download the latest version. 2. Install the IBM Director program. 3. Download and install any applicable updates or interim fixes for the server: a. Go to http://www.ibm.com. b. Click Support & downloads. c. Click Downloads & drivers. d. In the search field, type director 8486 and click Submit. e. Select any applicable update or interim fix that you want to download. f. Click the file link for the executable file to download the file, and follow the instructions in the readme file to install the update or interim fix. g. Repeat steps 3e and 3f for any additional updates or interim fixes that you want to install. 46 xSeries 100 Type 8486: User's Guide