IBM 86802SY Installation Guide - Page 14

6. Installing Additional Options If you have additional options to install, do so now. For installation instructions, refer to the information in this Server Library and the information provided with the option. 1 Before installing options, turn off your server and unplug the server power cord from the outlet. Important Adding or removing some options can change configuration information in the server. When you start (boot) the server after adding or removing options, POST message 164 appears if configuration information has changed. Start the Configuration/Setup Utility program and select Save Settings. If you plan to install multiple network adapters, install only one at this time. After you have installed the network operating system (NOS) and it is starting without errors, install the additional network adapters one at a time. You can install all adapters at once, but installing the adapters one at a time makes locating a defective adapter much easier. 2 Use the tables provided in the "Hardware Information" section of this Server Library to: Update the "Hardware Information" device-records tables with the new option information. If you installed a second microprocessor, update the microprocessor information. Record the server serial number and key serial number. 3 After you have installed all your options, return here and continue with "Software Installation" on page 13. 12 Netfinity 7000 M10 Express Setup and Installation