IC Realtime PTZ-5323-IR Product Manual - Page 18
Address Information
View all IC Realtime PTZ-5323-IR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
4.4.1.2 Address Information ADDR TYPE ADDR-HARD ADDR-SOFT BACK EXIT : HARD : 001 : 001 Move the cursor to SITE INFORMATION and then click confirm button. z ADDR TYPE: There are two options: soft and hard. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. Please note you need to reboot to activate current setup. z ADDR-HARD: It is an address you set in the dial switch. You can not modify it through software. z ADDR-SOFT: You can set address via software. It is to say, you can use menu to modify dome address. The value ranges from 0 to 254. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. z BACK: Go back to the previous menu. z EXIT: Log out system menu. 4.4.2 Display Setting PRESET TITLE AZIMUTH DISP POSITION ZOOM DISP INSIDE TEMP TITLE DISP BACK EXIT :ON (ON/OFF) :ON (ON/OFF) :OFF (ON/OFF) :OFF (ON/OFF) : OFF (℃/FOFF) :OFF (ON/OFF) Move the cursor to DISPLAY SETUP and then click confirm button, you can go to the third submenu. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. After completed setup, please click save button to save current setup. z PRESET TITLE: Display dome preset title or not. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. You can go to Function Setup->Preset section to set corresponding preset value and preset title. z AZIMUTH DISP: Display dome current coordinates or not. Please use the left/right button on the keyboard or in the speed dome terminal menu to set z POSITION: Display the angel between the benchmark and then current location. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. z ZOOM DISP: Display speed dome zoom speed or not. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. z INSIDE TEMPERATURE: Display dome internal temperature or not. There are three options: ℃/F/Off. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. z TITLE DISPLAY: Here you can set to display the speed dome title or not. z BACK: Go back to the previous menu. z EXIT: Log out system menu. 4.4.3 Camera Setting 11