IC Realtime PTZ-5323-IR Product Manual - Page 20

AE MODE GAIN SETTING SHUTTER IRIS SETTING EXPOSURE COM SLOW AE SLOW SHUTTER WDR ENBALE NEXT PAGE BACK EXIT : AUTO : 02 : 1/50 : 11 : 08 : 01 ON : OFF BLC GAIN LIMIT SLOW SHUTTER LIMIT NOISE REDUCTION 3D NOISE CONTROL BACK EXIT :ON/OFF : 08 : 1/12 : 03 : ON/OFF z AE MODE: Here you can set the camera exposure mode. It includes: auto/manual/AV (iris priority)/TV (shutter priority). Please use the left/right button on the keyboard or in the speed dome terminal menu to set. o Auto: It becomes valid after you set the exposure compensation, backlight compensation (BLC), slow shutter, wide dynamic region (WDR). o Manual: It becomes valid after you set the gain setting, shutter, iris setting, wide dynamic region (WDR). o AV: It becomes valid after you set the exposure setting, iris setting, wide dynamic region (WDR). o TV: It becomes valid after you set the shutter setting, exposure compensation, wide dynamic region (WDR). z GAIN SETTING: It is to adjust the gain. It has several levels. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. z SHUTTER: You can set shutter speed here. It has several levels. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. z IRIS SETTING: It is to set iris. It has several levels. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. z EXPOSURE COM: It is to set exposition mode. It has several levels. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. z SLOW AE: In the strong light environment, you can lower the camera exposure speed to capture the image and enhance the definition. The value ranges from 1 to 16. The bigger the value, the higher the exposure speed. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. z SLOW SHUTTER: In lower illumination environment, you can lower the cameras auto exposure time to capture the image and enhance the definition. Please note for the moving object, the image trail phenomenon may occur. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. z WDR ENBALE: It is an abbreviation for wide dynamic region. Please make sure your camera supports current function. This function can adjust the video brightness when the contrast between the strong light and the dark light is too high. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. z NEXT PAGE: It includes: BLC, GAIN LIMIT, SLOW SHUTTER LOW LIMIT, NOISE REDUCTION, 3D NOISE REDUCTION. Move the cursor to the item and then click the left/right button to set. o BLC: It is an abbreviation for back light compensation. System can compensate the object in the dark light to achieve a clear video. Please use the left/right button on the keyboard or in the speed dome terminal menu to set. o GAIN LIMIT: It is to control the camera gain. The video noise may be too high if the gain value is large in the low illumination. 13