Icom A16 Instruction Manual - Page 15
Using a wired headset, Disconnecting a paired device, Unpairing a device
View all Icom A16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
HEADSET CONNECTION 5 DDDisconnecting a paired device DDUnpairing a device 1 You can disconnect a paired Bluetooth device if it is not being used. Before unpairing a connected headset or device, disconnect it by following the steps 2 1. Push [FUNC], and then hold down shown to the left. [ENT]/[SET] for 1 second to enter the 1. Push [FUNC], and then hold down 3 Set mode. 2. Select "DISCON," and then push [ENT]/[SET] for 1 second to enter the Set mode. 4 [ENT]/[SET]. BT SET > DISCON 2. Select "CONNECT," and then push [ENT]/[SET]. 5 ••"SUCCESS" is displayed and the BT SET > CONNECT 6 headset is disconnected. 3. Push [CLR]/[HOME] twice to exit the ••A paired deviceʼs name is displayed. LL Push [MR]/[MW] to display the 7 Set mode. Bluetooth device address. LL Push [∫] or [√] to select other paired 8 headsets, if necessary. 3. Push [FUNC], and then push 9 [CLR]/[HOME]. ••"DELETE?" is displayed. 10 4. Push [ENT]/[SET]. 5. Push [CLR]/[HOME] twice to exit the 11 Set mode. 12 ■■ Using a wired headset 13 Connect your headset through the optional OPC-2401 headset adapter. 14 15 PTT switch (User supplied, if necessary) Use a PTT switch with a 3.5 mm (1/8 inch) plug. 16 17 18 Headset (User supplied) OPC-2401 BASIC MANUAL 10