Icom A16 Instruction Manual - Page 16

6 SPECIFICATIONS AND OPTIONS ■■ Specifications Measurements made without an antenna. LL All stated specifications are subject to change without notice or obligation. DDGeneral Frequency range: IC-A16 IC-A16E TX RX WX TX/RX 118.000 ~ 136.99166 MHz 108.000 ~ 136.99166 MHz 161.650 ~ 163.275 MHz 118.000 ~ 136.99166 MHz Channel spacing: 25 kHz/8.33 kHz Mode: IC-A16 6K00A3E/5K60A3E 16K0G3E (WX) IC-A16E 6K80A3E/5K00A3E Number of Memory channels: 200 Channels Antenna impedance: 50 Ω nominal Antenna connector: BNC type Power supply requirement: 7.2 V DC standard Current drain: Less than 1.8 A Operating temperature range: IC-A16 -10˚C ~ +60˚C, 14˚F ~ 140˚F IC-A16E -20˚C ~ +55˚C Dimensions*1 : 52.2 (W) × 111.8 (H) × 34.1 (D) mm, 2.1 (W) × 4.4 (H) × 1.3 (D) inches Weight (approximately): 257 g, 9.1 oz with BP-280 DDTransmitter Output power: Modulation limiting (IC-A16): Modulation depth (IC-A16E): Audio harmonic distortion: Ham and Noise ratio: Spurious emissions: Frequency stability: IC-A16 IC-A16E IC-A16 IC-A16E IC-A16 IC-A16E 6.0 W (PEP), 1.8 W (CW) 70 ~ 100% 85% Less than 10% (at 60% modulation) Less than 10% (at 85% + 3dB modulation) More than 35 dB More than 46 dB*2*3 Less than -36 dBm*4 ±0.4 kHz ±1 ppm DDReceiver Receive system: Intermediate frequencies: Sensitivity: IC-A16 IC-A16E Squelch sensitivity (Threshold): Spurious response rejection ratio: IC-A16 IC-A16E Double conversion superheterodyne 1st 46.35 MHz, 2nd 450 kHz COM Less than 0 dBμ (at 6 dB S/N) NAV Less than 3 dBμ (at 6 dB S/N) WX Less than -8 dBμ (at 12 dB SINAD) Less than 0 dBμ (at 12 dB SINAD with CCITT) COM/NAV Less than 0 dBμ WX Less than -5 dBμ COM/NAV More than 60 dB WX More than 30 dB More than 70 dB BASIC MANUAL 11