Icom A220 Instruction Manual - Page 18
Selecting channel tag names, Channel tag list, DISPLAY, Group, About U-1/U-2
View all Icom A220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
3 MEMORY OPERATION DDS electing channel tag names (For only group memory channels) The tag name can be set to a three character name, in addition to the group number. It is convenient for separating memory types. q Push [RCL] to enter the memory mode, and then rotate [O-DIAL] to select group memory channel. wwPush [DIAL] and then rotate [O-DIAL] to select a memory group from GRP01 to GRP05. • Push [DIAL] again to set the memory group. eePush [MEM] and then rotate [O-DIAL] to select "CH TAG." rrPush [MEM] and then rotate [DIAL] to select the desired channel tag. • The tag name shown to the right is selectable. ttPush [MEM] to set the channel tag. yyHold down [RCL] to exit the memory mode. GRP01 122.00 127.005 CH01 TWR Channel tag list TAG DISPLAY NAME Group*1 GPS*2 MEANS _ _ _ YES - Non-tag TWR YES YES Tower GND YES YES Ground ATS YES YES ATIS ATF YES YES Air traffic APP YES YES Approach ARR YES YES Arrival AWS YES YES Automatic Weather Station CLR YES YES Clearance / Delivery CTF YES YES Common Traffic Advisory Frequency DEP YES YES Departure FSS YES YES Flight Service Station RFS YES YES Remote Flight Service Station UNI YES YES Unicom frequency MF YES YES Mandatory frequency OTH YES - Other U-1 YES - User1 setting (p. 24) U-2 YES - User2 setting (p. 24) *1Group memory, *2GPS memory About U-1/U-2 You can edit U-1 and U-2 to the desired tag name in the Configuration menu. Refer to page 24 for the details. 11